© The One Stop Pool Shop
email us
Sales@ theone
stoppoolshop.com
Sales@ theone
stoppoolshop.com
How to order
Call us on
01752 698 364
Call us on
01752 698 364
Water Balance:
pH & Alkalinity Reducer 7kg (Dry Acid) CORRECTS HIGH pH AND HIGH ALKALINITY.
According to the method of dosing, Fi-Clor pH & Alkalinity Reducer (Dry Acid) will lower
either the pH or the total alkalinity in swimming pool water. High pH can result in cloudy
water and contribute to scale formation. More importantly, it will reduce the effectiveness
of chlorinebased sanitisers as they produce less free active chlorine.
High alkalinity will make it difficult to adjust the pH as any correcting chemicals will
be taken up by the alkalinity and are unable to alter the pH.
According to the method of dosing, Fi-
water and contribute to scale formation. More importantly, it will reduce the effectiveness
of chlorinebased sanitisers as they produce less free active chlorine.
High alkalinity will make it difficult to adjust the pH as any correcting chemicals will
be taken up by the alkalinity and are unable to alter the pH.
pH Increaser 5kg (Soda Ash)
Fi-Clor pH Increaser (Soda Ash) is for raising the pH level in swimming pool water.
pH is a measure of how acid or how alkaline the water is. Low pH can lead to skin
irritation and corrosion of equipment.
Fi-
pH is a measure of how acid or how alkaline the water is. Low pH can lead to skin
Alkalinity Increaser 5kg (Bicarbonate) CORRECTS LOW TOTAL ALKALINITY.
Fi-Clor Alkalinity Increaser (Bicarbonate) is for raising the total alkalinity level in
swimming pool water. Alkalinity is a measure of the amount of alkali
(or in chemical terms, bicarbonates and carbonates) in the water. If the alkalinity
is too low, any chemicals added to the pool will directly affect the pH, causing
rapid fluctuations in pH readings. Alkalinity at the correct level will help protect,
or 'buffer' the pH.
Fi-
(or in chemical terms, bicarbonates and carbonates) in the water. If the alkalinity
is too low, any chemicals added to the pool will directly affect the pH, causing
rapid fluctuations in pH readings. Alkalinity at the correct level will help protect,
or 'buffer' the pH.
Hardness Increaser 4kg (Calcium Chloride Flake) CORRECTS LOW CALCIUM HARDNESS.
Fi-Clor Hardness Increaser is for raising the calcium hardness level in swimming
pool water.
Calcium hardness is the amount of dissolved calcium and magnesium in pool water.
If there is insufficient dissolved calcium, the water will try and take it from the
grouting and concrete in the pool. High levels are not a major cause for concern
provided the pH and alkalinity are within recommended parameters,
but the reading should be kept below 1000mg/l (ppm) if possible.
Fi-
Calcium hardness is the amount of dissolved calcium and magnesium in pool water.
If there is insufficient dissolved calcium, the water will try and take it from the
grouting and concrete in the pool. High levels are not a major cause for concern
provided the pH and alkalinity are within recommended parameters,
but the reading should be kept below 1000mg/l (ppm) if possible.
Previous / Next
◄
